4 files changed, 139 insertions, 139 deletions
diff --git a/Ch 5 Debugging Project/Ch 5 Debugging Project.cpp b/Ch 5 Debugging Project/CST116-Debugging-Ahmed.cpp
index 52881e5..0bce69d 100644
--- a/Ch 5 Debugging Project/Ch 5 Debugging Project.cpp
+++ b/Ch 5 Debugging Project/CST116-Debugging-Ahmed.cpp
@@ -1,105 +1,105 @@
-/********************************************************************
-* File: Chap_5_Debugging.cpp
-*
-* General Instructions: Complete each step before proceeding to the
-* next.
-*
-* Debugging Exercise 1 (Skipped because didn't work)
-*
-* 1) On the lines indicated in the code below, insert a breakpoint.
-* 2) With the program not in debugging mode, start debugging by
-*    using the "Step Into" tool.
-* 3) Click on the Watch1 tab.
-* 4) With the cursor in the Name column type money and press enter.
-*    This adds a programmer defined watch on the variable money.
-* 5) Step Into until you reach the first cout statement. With
-*    the current line being that cout statement, Step Into again.
-* 6) What happened? Where are we now? What is all of this nasty
-*    looking code? 
-*  - 
-* 7) Remember, stepping into a predefined routine takes you to the
-*    code for that routine. If the debugger can't find the code it
-*    will show the assembly code for that routine.
-* 8) How do we get out of this mess? Use the "Step Out" tool.
-* 9) In Visual Studio you will be taken back to the same cout
-*    statement. Use the Step Over tool to take you to the next
-*    line.
-* 10) Step over the next cout statement. Now look at the console
-*     window. What was printed?
-* 11) Select Stop Debugging either from the Debug menu or from your
-*     toolbar.
-*
-* Debugging Exercise 2
-* 
-*  
-* 
-*
-* 1) With the program stopped, run to Breakpoint 1 by selecting
-*    the Start Debugging menu option, toolbar icon or press F5.
-* 2) Step over the cout.
-* 3) Step over the cin. Notice that you can now enter a value.
-* 4) Enter the value .1 and press enter.
-* 5) Notice that the current line of execution is now at the
-*    calculation.
-* 6) Look at your watch. What is the value of money? 
-        		
-                money	123.449997	float
-
-* 7) Hover your mouse pointer over raise. What is its value?
-        		
-                raise	0.100000001	float
-
-* 8) Step over the calculation. Notice the watch on money is now
-*    red. This designates that the variable just changed its value.
-* 9) What happened to our money? I thought a raise was supposed
-*    to increase our money? Stop debugging and fix the calculation.
-       
-     - The calculation only multiplies the money by the raise, 
-       when it should actually be multiplying it by raise + 1. 
-       Right now we are only getting the value that the money
-       shoudl be increases by. 
-*       
-*
-* Debugging Exercise 3
-*
-* 1) Choose Disable All Breakpoints from the Debug menu.
-* 2) With the cursor on the calculation, Run to Cursor. Remember
-*    that the Run to Cursor tool can be accessed by right clicking
-*    in the code window and choosing the correct menu option.
-* 3) Step over the calculation and verify that this time
-*    you end up with more money than before the raise.
-* 4) Stop debugging. Now run the entire program by choosing the menu
-*    option Start Without Debugging.
-*
-********************************************************************/
-
-// Name: Musa Ahmed, Course: CST116, Lab # 0, Learn how to debug and how to use an IDE as well as GitHub 
-
-#include <iostream>
-#include <iomanip>
-using std::cout;
-using std::cin;
-using std::endl;
-
-int main()
-{
-    float money = 123.45F;
-    float raise;
-   
-
-    cout << "You have $";
-    cout << money << endl;
-
-    // Breakpoint 1
-    // Put a breakpoint on the following line
-    cout << "Enter percent raise: ";
-    cin >> raise;
-
-    money = (money * (raise + 1));
-   
-
-    cout << "After your raise you have $";
-    cout << money << endl;
-
-    return 0;
+/********************************************************************
+* File: Chap_5_Debugging.cpp
+*
+* General Instructions: Complete each step before proceeding to the
+* next.
+*
+* Debugging Exercise 1 (Skipped because didn't work)
+*
+* 1) On the lines indicated in the code below, insert a breakpoint.
+* 2) With the program not in debugging mode, start debugging by
+*    using the "Step Into" tool.
+* 3) Click on the Watch1 tab.
+* 4) With the cursor in the Name column type money and press enter.
+*    This adds a programmer defined watch on the variable money.
+* 5) Step Into until you reach the first cout statement. With
+*    the current line being that cout statement, Step Into again.
+* 6) What happened? Where are we now? What is all of this nasty
+*    looking code? 
+*  - 
+* 7) Remember, stepping into a predefined routine takes you to the
+*    code for that routine. If the debugger can't find the code it
+*    will show the assembly code for that routine.
+* 8) How do we get out of this mess? Use the "Step Out" tool.
+* 9) In Visual Studio you will be taken back to the same cout
+*    statement. Use the Step Over tool to take you to the next
+*    line.
+* 10) Step over the next cout statement. Now look at the console
+*     window. What was printed?
+* 11) Select Stop Debugging either from the Debug menu or from your
+*     toolbar.
+*
+* Debugging Exercise 2
+* 
+*  
+* 
+*
+* 1) With the program stopped, run to Breakpoint 1 by selecting
+*    the Start Debugging menu option, toolbar icon or press F5.
+* 2) Step over the cout.
+* 3) Step over the cin. Notice that you can now enter a value.
+* 4) Enter the value .1 and press enter.
+* 5) Notice that the current line of execution is now at the
+*    calculation.
+* 6) Look at your watch. What is the value of money? 
+        		
+                money	123.449997	float
+
+* 7) Hover your mouse pointer over raise. What is its value?
+        		
+                raise	0.100000001	float
+
+* 8) Step over the calculation. Notice the watch on money is now
+*    red. This designates that the variable just changed its value.
+* 9) What happened to our money? I thought a raise was supposed
+*    to increase our money? Stop debugging and fix the calculation.
+       
+     - The calculation only multiplies the money by the raise, 
+       when it should actually be multiplying it by raise + 1. 
+       Right now we are only getting the value that the money
+       shoudl be increases by. 
+*       
+*
+* Debugging Exercise 3
+*
+* 1) Choose Disable All Breakpoints from the Debug menu.
+* 2) With the cursor on the calculation, Run to Cursor. Remember
+*    that the Run to Cursor tool can be accessed by right clicking
+*    in the code window and choosing the correct menu option.
+* 3) Step over the calculation and verify that this time
+*    you end up with more money than before the raise.
+* 4) Stop debugging. Now run the entire program by choosing the menu
+*    option Start Without Debugging.
+*
+********************************************************************/
+
+// Name: Musa Ahmed, Course: CST116, Lab # 0, Learn how to debug and how to use an IDE as well as GitHub 
+
+#include <iostream>
+#include <iomanip>
+using std::cout;
+using std::cin;
+using std::endl;
+
+int main()
+{
+    float money = 123.45F;
+    float raise;
+   
+
+    cout << "You have $";
+    cout << money << endl;
+
+    // Breakpoint 1
+    // Put a breakpoint on the following line
+    cout << "Enter percent raise: ";
+    cin >> raise;
+
+    money = (money * (raise + 1));
+   
+
+    cout << "After your raise you have $";
+    cout << money << endl;
+
+    return 0;
 }
 \ No newline at end of file
diff --git a/Ch 5 Debugging Project/Ch 5 Debugging Project.sln b/Ch 5 Debugging Project/CST116-Dubugging-Ahmed.sln
index 71bfae3..b289923 100644
--- a/Ch 5 Debugging Project/Ch 5 Debugging Project.sln
+++ b/Ch 5 Debugging Project/CST116-Dubugging-Ahmed.sln
@@ -1,31 +1,31 @@
-
-Microsoft Visual Studio Solution File, Format Version 12.00
-# Visual Studio Version 16
-VisualStudioVersion = 16.0.32228.343
-MinimumVisualStudioVersion = 10.0.40219.1
-Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "Ch 5 Debugging Project", "Ch 5 Debugging Project.vcxproj", "{57683855-4FB5-44EC-A27A-69826948F323}"
-EndProject
-Global
-	GlobalSection(SolutionConfigurationPlatforms) = preSolution
-		Debug|x64 = Debug|x64
-		Debug|x86 = Debug|x86
-		Release|x64 = Release|x64
-		Release|x86 = Release|x86
-	EndGlobalSection
-	GlobalSection(ProjectConfigurationPlatforms) = postSolution
-		{57683855-4FB5-44EC-A27A-69826948F323}.Debug|x64.ActiveCfg = Debug|x64
-		{57683855-4FB5-44EC-A27A-69826948F323}.Debug|x64.Build.0 = Debug|x64
-		{57683855-4FB5-44EC-A27A-69826948F323}.Debug|x86.ActiveCfg = Debug|Win32
-		{57683855-4FB5-44EC-A27A-69826948F323}.Debug|x86.Build.0 = Debug|Win32
-		{57683855-4FB5-44EC-A27A-69826948F323}.Release|x64.ActiveCfg = Release|x64
-		{57683855-4FB5-44EC-A27A-69826948F323}.Release|x64.Build.0 = Release|x64
-		{57683855-4FB5-44EC-A27A-69826948F323}.Release|x86.ActiveCfg = Release|Win32
-		{57683855-4FB5-44EC-A27A-69826948F323}.Release|x86.Build.0 = Release|Win32
-	EndGlobalSection
-	GlobalSection(SolutionProperties) = preSolution
-		HideSolutionNode = FALSE
-	EndGlobalSection
-	GlobalSection(ExtensibilityGlobals) = postSolution
-		SolutionGuid = {847C2D32-D5B4-4378-AF10-BC31589B8C0A}
-	EndGlobalSection
-EndGlobal
+
+Microsoft Visual Studio Solution File, Format Version 12.00
+# Visual Studio Version 16
+VisualStudioVersion = 16.0.32228.343
+MinimumVisualStudioVersion = 10.0.40219.1
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "Ch 5 Debugging Project", "Ch 5 Debugging Project.vcxproj", "{57683855-4FB5-44EC-A27A-69826948F323}"
+EndProject
+Global
+	GlobalSection(SolutionConfigurationPlatforms) = preSolution
+		Debug|x64 = Debug|x64
+		Debug|x86 = Debug|x86
+		Release|x64 = Release|x64
+		Release|x86 = Release|x86
+	EndGlobalSection
+	GlobalSection(ProjectConfigurationPlatforms) = postSolution
+		{57683855-4FB5-44EC-A27A-69826948F323}.Debug|x64.ActiveCfg = Debug|x64
+		{57683855-4FB5-44EC-A27A-69826948F323}.Debug|x64.Build.0 = Debug|x64
+		{57683855-4FB5-44EC-A27A-69826948F323}.Debug|x86.ActiveCfg = Debug|Win32
+		{57683855-4FB5-44EC-A27A-69826948F323}.Debug|x86.Build.0 = Debug|Win32
+		{57683855-4FB5-44EC-A27A-69826948F323}.Release|x64.ActiveCfg = Release|x64
+		{57683855-4FB5-44EC-A27A-69826948F323}.Release|x64.Build.0 = Release|x64
+		{57683855-4FB5-44EC-A27A-69826948F323}.Release|x86.ActiveCfg = Release|Win32
+		{57683855-4FB5-44EC-A27A-69826948F323}.Release|x86.Build.0 = Release|Win32
+	EndGlobalSection
+	GlobalSection(SolutionProperties) = preSolution
+		HideSolutionNode = FALSE
+	EndGlobalSection
+	GlobalSection(ExtensibilityGlobals) = postSolution
+		SolutionGuid = {847C2D32-D5B4-4378-AF10-BC31589B8C0A}
+	EndGlobalSection
+EndGlobal
diff --git a/Ch 5 Debugging Project/Ch 5 Debugging Project.vcxproj b/Ch 5 Debugging Project/Ch 5 Debugging Project.vcxproj
index 67135b9..1229178 100644
--- a/Ch 5 Debugging Project/Ch 5 Debugging Project.vcxproj
+++ b/Ch 5 Debugging Project/Ch 5 Debugging Project.vcxproj
@@ -140,10 +140,10 @@
     </Link>
   </ItemDefinitionGroup>
   <ItemGroup>
-    <ClCompile Include="Ch 5 Debugging Project.cpp" />
+    <ClCompile Include="CST116-Debugging-Ahmed.cpp" />
   </ItemGroup>
   <ItemGroup>
-    <Image Include="..\..\..\..\OneDrive\Pictures\CST116-Lab0-Ahmed.png" />
+    <Image Include="..\..\..\..\OneDrive\Pictures\CST116-Debugging-Ahmed.png" />
   </ItemGroup>
   <ItemGroup>
     <Text Include="CST11116-Lab0-Ahmed.txt" />
diff --git a/Ch 5 Debugging Project/Ch 5 Debugging Project.vcxproj.filters b/Ch 5 Debugging Project/Ch 5 Debugging Project.vcxproj.filters
index 3911d3f..e75d2b2 100644
--- a/Ch 5 Debugging Project/Ch 5 Debugging Project.vcxproj.filters
+++ b/Ch 5 Debugging Project/Ch 5 Debugging Project.vcxproj.filters
@@ -15,12 +15,12 @@
     </Filter>
   </ItemGroup>
   <ItemGroup>
-    <ClCompile Include="Ch 5 Debugging Project.cpp">
+    <ClCompile Include="CST116-Debugging-Ahmed.cpp">
       <Filter>Source Files</Filter>
     </ClCompile>
   </ItemGroup>
   <ItemGroup>
-    <Image Include="..\..\..\..\OneDrive\Pictures\CST116-Lab0-Ahmed.png">
+    <Image Include="..\..\..\..\OneDrive\Pictures\CST116-Debugging-Ahmed.png">
       <Filter>Source Files</Filter>
     </Image>
   </ItemGroup>