Initial Commit

3 files changed, 77 insertions, 76 deletions

diff --git a/CST116-Ch8-Debugging/CST116-Ch8-Debugging.cpp b/CST116-Ch8-Debugging/CST116-Ch8-Debugging-Chambers.cpp
index 53e4a61..f7d77fb 100644
--- a/CST116-Ch8-Debugging/CST116-Ch8-Debugging.cpp
+++ b/CST116-Ch8-Debugging/CST116-Ch8-Debugging-Chambers.cpp
@@ -1,74 +1,74 @@
-/********************************************************************

-* File: CST116-Ch8-Debugging.cpp

-*

-* General Instructions: Complete each step before proceeding to the

-* next.

-*

-* Debugging Exercise 1

-*

-* 1) Insert a breakpoint on the lines indicated in the code.

-* 2) Run to Breakpoint 1.

-* 3) Place a watch on i.

-* 4) Execute the while statement by doing a "Step Into".

-* 5) The execution continues to the cout statement as expected.

-* 6) Step over the cout statement.

-* 7) Why didn't the flow of the program return back to the while

-*    statement?

-* 8) Fix this problem by removing the ; after the while statement.

-* 9) Stop debugging and repeat Steps 2 � 5 to verify the correction

-*    worked.

-* 10) Stop debugging.

-*

-* Debugging Exercise 2

-*

-* 1) Run to Breakpoint 1.

-* 2) Step into the while loop.

-* 3) Why did the cout not execute?

-* 4) Check the value of i, now check the condition, does the

-*    condition evaluate to true?

-* 5) Change the "< 0" to a "< 10".

-* 6) Stop debugging and repeat Steps 1 � 4 to verify the correction

-*    worked.

-* 7) Stop debugging.

-*

-* Debugging Exercise 3

-*

-* 1) Run the program without debugging.

-* 2) What is happening now is an infinite loop.

-* 3) End your program by holding down the Ctrl key and pressing C.

-* 4) Fix the problem by adding a "++" after the i in the cout

-*    statement.

-* 5) Run the program to Breakpoint 2 and verify that the output

-*    displayed on the screen is 0 � 9.

-*

-* Debugging Exercise 4

-*

-* 1) Run to Breakpoint 2.

-* 2) Add a watch to the variable count.

-* 3) Verify that the contents of count is garbage.

-* 4) Step into the loop.

-* 5) What is the value stored in count now?

-* 6) Where was 10 assigned to count?

-* 7) Fix the problem and re-run to verify.

-********************************************************************/

-#include <iostream>

-using std::cout;

-using std::endl;

-

-int main()

-{

-    int i = 0;

-    int count;

-

-    // Breakpoint 1

-    // Put a breakpoint on the following line

-    while (i < 0);

-    cout << i << endl;

-

-    // Breakpoint 2

-    // Put a breakpoint on the following line

-    for (count = 0; count < 10; count++);

-    cout << count << endl;

-

-    return 0;

-}

+/********************************************************************
+* File: CST116-Ch8-Debugging.cpp
+*
+* General Instructions: Complete each step before proceeding to the
+* next.
+*
+* Debugging Exercise 1
+*
+* 1) Insert a breakpoint on the lines indicated in the code.
+* 2) Run to Breakpoint 1.
+* 3) Place a watch on i.
+* 4) Execute the while statement by doing a "Step Into".
+* 5) The execution continues to the cout statement as expected.
+* 6) Step over the cout statement.
+* 7) Why didn't the flow of the program return back to the while
+*    statement?
+* 8) Fix this problem by removing the ; after the while statement.
+* 9) Stop debugging and repeat Steps 2 � 5 to verify the correction
+*    worked.
+* 10) Stop debugging.
+*
+* Debugging Exercise 2
+*
+* 1) Run to Breakpoint 1.
+* 2) Step into the while loop.
+* 3) Why did the cout not execute?
+* 4) Check the value of i, now check the condition, does the
+*    condition evaluate to true?
+* 5) Change the "< 0" to a "< 10".
+* 6) Stop debugging and repeat Steps 1 � 4 to verify the correction
+*    worked.
+* 7) Stop debugging.
+*
+* Debugging Exercise 3
+*
+* 1) Run the program without debugging.
+* 2) What is happening now is an infinite loop.
+* 3) End your program by holding down the Ctrl key and pressing C.
+* 4) Fix the problem by adding a "++" after the i in the cout
+*    statement.
+* 5) Run the program to Breakpoint 2 and verify that the output
+*    displayed on the screen is 0 � 9.
+*
+* Debugging Exercise 4
+*
+* 1) Run to Breakpoint 2.
+* 2) Add a watch to the variable count.
+* 3) Verify that the contents of count is garbage.
+* 4) Step into the loop.
+* 5) What is the value stored in count now?
+* 6) Where was 10 assigned to count?
+* 7) Fix the problem and re-run to verify.
+********************************************************************/
+#include <iostream>
+using std::cout;
+using std::endl;
+
+int main()
+{
+    int i = 0;
+    int count;
+
+    // Breakpoint 1
+    // Put a breakpoint on the following line
+    while (i < 0);
+    cout << i << endl;
+
+    // Breakpoint 2
+    // Put a breakpoint on the following line
+    for (count = 0; count < 10; count++);
+    cout << count << endl;
+
+    return 0;
+}
diff --git a/CST116-Ch8-Debugging/CST116-Ch8-Debugging.vcxproj b/CST116-Ch8-Debugging/CST116-Ch8-Debugging.vcxproj
index b7c71c7..05034a7 100644
--- a/CST116-Ch8-Debugging/CST116-Ch8-Debugging.vcxproj
+++ b/CST116-Ch8-Debugging/CST116-Ch8-Debugging.vcxproj
@@ -24,6 +24,7 @@
     <ProjectGuid>{15fb2850-7b95-4328-9080-89f6cea8e210}</ProjectGuid>

     <RootNamespace>CST116Ch8Debugging</RootNamespace>

     <WindowsTargetPlatformVersion>10.0</WindowsTargetPlatformVersion>

+    <ProjectName>CST116-Ch8-Debugging-Chambers</ProjectName>

   </PropertyGroup>

   <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />

   <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">

@@ -127,7 +128,7 @@
     </Link>

   </ItemDefinitionGroup>

   <ItemGroup>

-    <ClCompile Include="CST116-Ch8-Debugging.cpp" />

+    <ClCompile Include="CST116-Ch8-Debugging-Chambers.cpp" />

   </ItemGroup>

   <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />

   <ImportGroup Label="ExtensionTargets">

diff --git a/CST116-Ch8-Debugging/CST116-Ch8-Debugging.vcxproj.filters b/CST116-Ch8-Debugging/CST116-Ch8-Debugging.vcxproj.filters
index 3af9a09..b7f3c3f 100644
--- a/CST116-Ch8-Debugging/CST116-Ch8-Debugging.vcxproj.filters
+++ b/CST116-Ch8-Debugging/CST116-Ch8-Debugging.vcxproj.filters
@@ -15,7 +15,7 @@
     </Filter>

   </ItemGroup>

   <ItemGroup>

-    <ClCompile Include="CST116-Ch8-Debugging.cpp">

+    <ClCompile Include="CST116-Ch8-Debugging-Chambers.cpp">

       <Filter>Source Files</Filter>

     </ClCompile>

   </ItemGroup>