3 files changed, 2 insertions, 155 deletions
diff --git a/CST116-Ch8-Debugging/CST116-Ch8-Debugging.cpp b/CST116-Ch8-Debugging/CST116-Ch8-Debugging.cpp
index 6f76146..4b86805 100644
--- a/CST116-Ch8-Debugging/CST116-Ch8-Debugging.cpp
+++ b/CST116-Ch8-Debugging/CST116-Ch8-Debugging.cpp
@@ -62,9 +62,9 @@ int main()
 
     // Breakpoint 1
     // Put a breakpoint on the following line
-    while (i <= 10)
+    while (i < 10)
  
-        cout << i << endl;
+        cout << i++ << endl;
     
 
 
diff --git a/CST116-Ch8-Debugging/enc_temp_folder/539ed82238b68da8f7d0a6718bc2cb6/CST116-Ch8-Debugging.cpp b/CST116-Ch8-Debugging/enc_temp_folder/539ed82238b68da8f7d0a6718bc2cb6/CST116-Ch8-Debugging.cpp
deleted file mode 100644
index d17d4f6..0000000
--- a/CST116-Ch8-Debugging/enc_temp_folder/539ed82238b68da8f7d0a6718bc2cb6/CST116-Ch8-Debugging.cpp
+++ /dev/null
@@ -1,76 +0,0 @@
-/********************************************************************
-* File: CST116-Ch8-Debugging.cpp
-*
-* General Instructions: Complete each step before proceeding to the
-* next.
-*
-* Debugging Exercise 1
-*
-* 1) Insert a breakpoint on the lines indicated in the code.
-* 2) Run to Breakpoint 1.
-* 3) Place a watch on i.
-* 4) Execute the while statement by doing a "Step Into".
-* 5) The execution continues to the cout statement as expected.
-* 6) Step over the cout statement.
-* 7) Why didn't the flow of the program return back to the while
-*    statement?
-* 8) Fix this problem by removing the ; after the while statement.
-* 9) Stop debugging and repeat Steps 2 � 5 to verify the correction
-*    worked.
-* 10) Stop debugging.
-*
-* Debugging Exercise 2
-*
-* 1) Run to Breakpoint 1.
-* 2) Step into the while loop.
-* 3) Why did the cout not execute?
-* 4) Check the value of i, now check the condition, does the
-*    condition evaluate to true?
-* 5) Change the "< 0" to a "< 10".
-* 6) Stop debugging and repeat Steps 1 � 4 to verify the correction
-*    worked.
-* 7) Stop debugging.
-*
-* Debugging Exercise 3
-*
-* 1) Run the program without debugging.
-* 2) What is happening now is an infinite loop.
-* 3) End your program by holding down the Ctrl key and pressing C.
-* 4) Fix the problem by adding a "++" after the i in the cout
-*    statement.
-* 5) Run the program to Breakpoint 2 and verify that the output
-*    displayed on the screen is 0 � 9.
-*
-* Debugging Exercise 4
-*
-* 1) Run to Breakpoint 2.
-* 2) Add a watch to the variable count.
-* 3) Verify that the contents of count is garbage.
-* 4) Step into the loop.
-* 5) What is the value stored in count now?
-* 6) Where was 10 assigned to count?
-* 7) Fix the problem and re-run to verify.
-********************************************************************/
-#include <iostream>
-using std::cout;
-using std::endl;
-
-int main()
-{
-    int i = 0;
-    int count;
-
-    // Breakpoint 1
-    // Put a breakpoint on the following line
-    while (i <= 0)
- 
-        cout << i << endl;
-    
-
-    // Breakpoint 2
-    // Put a breakpoint on the following line
-    for (count = 0; count < 10; count++);
-    cout << count << endl;
-
-    return 0;
-}
diff --git a/CST116-Ch8-Debugging/enc_temp_folder/ffa59882b7fd252be8931303b13184/CST116-Ch8-Debugging.cpp b/CST116-Ch8-Debugging/enc_temp_folder/ffa59882b7fd252be8931303b13184/CST116-Ch8-Debugging.cpp
deleted file mode 100644
index 4ead2ef..0000000
--- a/CST116-Ch8-Debugging/enc_temp_folder/ffa59882b7fd252be8931303b13184/CST116-Ch8-Debugging.cpp
+++ /dev/null
@@ -1,77 +0,0 @@
-/********************************************************************
-* File: CST116-Ch8-Debugging.cpp
-*
-* General Instructions: Complete each step before proceeding to the
-* next.
-*
-* Debugging Exercise 1
-*
-* 1) Insert a breakpoint on the lines indicated in the code.
-* 2) Run to Breakpoint 1.
-* 3) Place a watch on i.
-* 4) Execute the while statement by doing a "Step Into".
-* 5) The execution continues to the cout statement as expected.
-* 6) Step over the cout statement.
-* 7) Why didn't the flow of the program return back to the while
-*    statement?
-* 8) Fix this problem by removing the ; after the while statement.
-* 9) Stop debugging and repeat Steps 2 � 5 to verify the correction
-*    worked.
-* 10) Stop debugging.
-*
-* Debugging Exercise 2
-*
-* 1) Run to Breakpoint 1.
-* 2) Step into the while loop.
-* 3) Why did the cout not execute?
-* 4) Check the value of i, now check the condition, does the
-*    condition evaluate to true?
-* 5) Change the "< 0" to a "< 10".
-* 6) Stop debugging and repeat Steps 1 � 4 to verify the correction
-*    worked.
-* 7) Stop debugging.
-*
-* Debugging Exercise 3
-*
-* 1) Run the program without debugging.
-* 2) What is happening now is an infinite loop.
-* 3) End your program by holding down the Ctrl key and pressing C.
-* 4) Fix the problem by adding a "++" after the i in the cout
-*    statement.
-* 5) Run the program to Breakpoint 2 and verify that the output
-*    displayed on the screen is 0 � 9.
-*
-* Debugging Exercise 4
-*
-* 1) Run to Breakpoint 2.
-* 2) Add a watch to the variable count.
-* 3) Verify that the contents of count is garbage.
-* 4) Step into the loop.
-* 5) What is the value stored in count now?
-* 6) Where was 10 assigned to count?
-* 7) Fix the problem and re-run to verify.
-********************************************************************/
-#include <iostream>
-using std::cout;
-using std::endl;
-
-int main()
-{
-    int i = 0;
-    int count;
-
-    // Breakpoint 1
-    // Put a breakpoint on the following line
-    while (i <= 0)
- 
-        cout << i << endl;
-    
-
-
-    // Breakpoint 2
-    // Put a breakpoint on the following line
-    for (count = 0; count < 10; count++);
-    cout << count << endl;
-
-    return 0;
-}