Initial commit

7 files changed, 773 insertions, 0 deletions

diff --git a/.gitattributes b/.gitattributes
new file mode 100644
index 0000000..1ff0c42
--- /dev/null
+++ b/.gitattributes
@@ -0,0 +1,63 @@
+###############################################################################
+# Set default behavior to automatically normalize line endings.
+###############################################################################
+* text=auto
+
+###############################################################################
+# Set default behavior for command prompt diff.
+#
+# This is need for earlier builds of msysgit that does not have it on by
+# default for csharp files.
+# Note: This is only used by command line
+###############################################################################
+#*.cs     diff=csharp
+
+###############################################################################
+# Set the merge driver for project and solution files
+#
+# Merging from the command prompt will add diff markers to the files if there
+# are conflicts (Merging from VS is not affected by the settings below, in VS
+# the diff markers are never inserted). Diff markers may cause the following 
+# file extensions to fail to load in VS. An alternative would be to treat
+# these files as binary and thus will always conflict and require user
+# intervention with every merge. To do so, just uncomment the entries below
+###############################################################################
+#*.sln       merge=binary
+#*.csproj    merge=binary
+#*.vbproj    merge=binary
+#*.vcxproj   merge=binary
+#*.vcproj    merge=binary
+#*.dbproj    merge=binary
+#*.fsproj    merge=binary
+#*.lsproj    merge=binary
+#*.wixproj   merge=binary
+#*.modelproj merge=binary
+#*.sqlproj   merge=binary
+#*.wwaproj   merge=binary
+
+###############################################################################
+# behavior for image files
+#
+# image files are treated as binary by default.
+###############################################################################
+#*.jpg   binary
+#*.png   binary
+#*.gif   binary
+
+###############################################################################
+# diff behavior for common document formats
+# 
+# Convert binary document formats to text before diffing them. This feature
+# is only available from the command line. Turn it on by uncommenting the 
+# entries below.
+###############################################################################
+#*.doc   diff=astextplain
+#*.DOC   diff=astextplain
+#*.docx  diff=astextplain
+#*.DOCX  diff=astextplain
+#*.dot   diff=astextplain
+#*.DOT   diff=astextplain
+#*.pdf   diff=astextplain
+#*.PDF   diff=astextplain
+#*.rtf   diff=astextplain
+#*.RTF   diff=astextplain
diff --git a/.gitignore b/.gitignore
new file mode 100644
index 0000000..9491a2f
--- /dev/null
+++ b/.gitignore
@@ -0,0 +1,363 @@
+## Ignore Visual Studio temporary files, build results, and
+## files generated by popular Visual Studio add-ons.
+##
+## Get latest from https://github.com/github/gitignore/blob/master/VisualStudio.gitignore
+
+# User-specific files
+*.rsuser
+*.suo
+*.user
+*.userosscache
+*.sln.docstates
+
+# User-specific files (MonoDevelop/Xamarin Studio)
+*.userprefs
+
+# Mono auto generated files
+mono_crash.*
+
+# Build results
+[Dd]ebug/
+[Dd]ebugPublic/
+[Rr]elease/
+[Rr]eleases/
+x64/
+x86/
+[Ww][Ii][Nn]32/
+[Aa][Rr][Mm]/
+[Aa][Rr][Mm]64/
+bld/
+[Bb]in/
+[Oo]bj/
+[Oo]ut/
+[Ll]og/
+[Ll]ogs/
+
+# Visual Studio 2015/2017 cache/options directory
+.vs/
+# Uncomment if you have tasks that create the project's static files in wwwroot
+#wwwroot/
+
+# Visual Studio 2017 auto generated files
+Generated\ Files/
+
+# MSTest test Results
+[Tt]est[Rr]esult*/
+[Bb]uild[Ll]og.*
+
+# NUnit
+*.VisualState.xml
+TestResult.xml
+nunit-*.xml
+
+# Build Results of an ATL Project
+[Dd]ebugPS/
+[Rr]eleasePS/
+dlldata.c
+
+# Benchmark Results
+BenchmarkDotNet.Artifacts/
+
+# .NET Core
+project.lock.json
+project.fragment.lock.json
+artifacts/
+
+# ASP.NET Scaffolding
+ScaffoldingReadMe.txt
+
+# StyleCop
+StyleCopReport.xml
+
+# Files built by Visual Studio
+*_i.c
+*_p.c
+*_h.h
+*.ilk
+*.meta
+*.obj
+*.iobj
+*.pch
+*.pdb
+*.ipdb
+*.pgc
+*.pgd
+*.rsp
+*.sbr
+*.tlb
+*.tli
+*.tlh
+*.tmp
+*.tmp_proj
+*_wpftmp.csproj
+*.log
+*.vspscc
+*.vssscc
+.builds
+*.pidb
+*.svclog
+*.scc
+
+# Chutzpah Test files
+_Chutzpah*
+
+# Visual C++ cache files
+ipch/
+*.aps
+*.ncb
+*.opendb
+*.opensdf
+*.sdf
+*.cachefile
+*.VC.db
+*.VC.VC.opendb
+
+# Visual Studio profiler
+*.psess
+*.vsp
+*.vspx
+*.sap
+
+# Visual Studio Trace Files
+*.e2e
+
+# TFS 2012 Local Workspace
+$tf/
+
+# Guidance Automation Toolkit
+*.gpState
+
+# ReSharper is a .NET coding add-in
+_ReSharper*/
+*.[Rr]e[Ss]harper
+*.DotSettings.user
+
+# TeamCity is a build add-in
+_TeamCity*
+
+# DotCover is a Code Coverage Tool
+*.dotCover
+
+# AxoCover is a Code Coverage Tool
+.axoCover/*
+!.axoCover/settings.json
+
+# Coverlet is a free, cross platform Code Coverage Tool
+coverage*.json
+coverage*.xml
+coverage*.info
+
+# Visual Studio code coverage results
+*.coverage
+*.coveragexml
+
+# NCrunch
+_NCrunch_*
+.*crunch*.local.xml
+nCrunchTemp_*
+
+# MightyMoose
+*.mm.*
+AutoTest.Net/
+
+# Web workbench (sass)
+.sass-cache/
+
+# Installshield output folder
+[Ee]xpress/
+
+# DocProject is a documentation generator add-in
+DocProject/buildhelp/
+DocProject/Help/*.HxT
+DocProject/Help/*.HxC
+DocProject/Help/*.hhc
+DocProject/Help/*.hhk
+DocProject/Help/*.hhp
+DocProject/Help/Html2
+DocProject/Help/html
+
+# Click-Once directory
+publish/
+
+# Publish Web Output
+*.[Pp]ublish.xml
+*.azurePubxml
+# Note: Comment the next line if you want to checkin your web deploy settings,
+# but database connection strings (with potential passwords) will be unencrypted
+*.pubxml
+*.publishproj
+
+# Microsoft Azure Web App publish settings. Comment the next line if you want to
+# checkin your Azure Web App publish settings, but sensitive information contained
+# in these scripts will be unencrypted
+PublishScripts/
+
+# NuGet Packages
+*.nupkg
+# NuGet Symbol Packages
+*.snupkg
+# The packages folder can be ignored because of Package Restore
+**/[Pp]ackages/*
+# except build/, which is used as an MSBuild target.
+!**/[Pp]ackages/build/
+# Uncomment if necessary however generally it will be regenerated when needed
+#!**/[Pp]ackages/repositories.config
+# NuGet v3's project.json files produces more ignorable files
+*.nuget.props
+*.nuget.targets
+
+# Microsoft Azure Build Output
+csx/
+*.build.csdef
+
+# Microsoft Azure Emulator
+ecf/
+rcf/
+
+# Windows Store app package directories and files
+AppPackages/
+BundleArtifacts/
+Package.StoreAssociation.xml
+_pkginfo.txt
+*.appx
+*.appxbundle
+*.appxupload
+
+# Visual Studio cache files
+# files ending in .cache can be ignored
+*.[Cc]ache
+# but keep track of directories ending in .cache
+!?*.[Cc]ache/
+
+# Others
+ClientBin/
+~$*
+*~
+*.dbmdl
+*.dbproj.schemaview
+*.jfm
+*.pfx
+*.publishsettings
+orleans.codegen.cs
+
+# Including strong name files can present a security risk
+# (https://github.com/github/gitignore/pull/2483#issue-259490424)
+#*.snk
+
+# Since there are multiple workflows, uncomment next line to ignore bower_components
+# (https://github.com/github/gitignore/pull/1529#issuecomment-104372622)
+#bower_components/
+
+# RIA/Silverlight projects
+Generated_Code/
+
+# Backup & report files from converting an old project file
+# to a newer Visual Studio version. Backup files are not needed,
+# because we have git ;-)
+_UpgradeReport_Files/
+Backup*/
+UpgradeLog*.XML
+UpgradeLog*.htm
+ServiceFabricBackup/
+*.rptproj.bak
+
+# SQL Server files
+*.mdf
+*.ldf
+*.ndf
+
+# Business Intelligence projects
+*.rdl.data
+*.bim.layout
+*.bim_*.settings
+*.rptproj.rsuser
+*- [Bb]ackup.rdl
+*- [Bb]ackup ([0-9]).rdl
+*- [Bb]ackup ([0-9][0-9]).rdl
+
+# Microsoft Fakes
+FakesAssemblies/
+
+# GhostDoc plugin setting file
+*.GhostDoc.xml
+
+# Node.js Tools for Visual Studio
+.ntvs_analysis.dat
+node_modules/
+
+# Visual Studio 6 build log
+*.plg
+
+# Visual Studio 6 workspace options file
+*.opt
+
+# Visual Studio 6 auto-generated workspace file (contains which files were open etc.)
+*.vbw
+
+# Visual Studio LightSwitch build output
+**/*.HTMLClient/GeneratedArtifacts
+**/*.DesktopClient/GeneratedArtifacts
+**/*.DesktopClient/ModelManifest.xml
+**/*.Server/GeneratedArtifacts
+**/*.Server/ModelManifest.xml
+_Pvt_Extensions
+
+# Paket dependency manager
+.paket/paket.exe
+paket-files/
+
+# FAKE - F# Make
+.fake/
+
+# CodeRush personal settings
+.cr/personal
+
+# Python Tools for Visual Studio (PTVS)
+__pycache__/
+*.pyc
+
+# Cake - Uncomment if you are using it
+# tools/**
+# !tools/packages.config
+
+# Tabs Studio
+*.tss
+
+# Telerik's JustMock configuration file
+*.jmconfig
+
+# BizTalk build output
+*.btp.cs
+*.btm.cs
+*.odx.cs
+*.xsd.cs
+
+# OpenCover UI analysis results
+OpenCover/
+
+# Azure Stream Analytics local run output
+ASALocalRun/
+
+# MSBuild Binary and Structured Log
+*.binlog
+
+# NVidia Nsight GPU debugger configuration file
+*.nvuser
+
+# MFractors (Xamarin productivity tool) working folder
+.mfractor/
+
+# Local History for Visual Studio
+.localhistory/
+
+# BeatPulse healthcheck temp database
+healthchecksdb
+
+# Backup folder for Package Reference Convert tool in Visual Studio 2017
+MigrationBackup/
+
+# Ionide (cross platform F# VS Code tools) working folder
+.ionide/
+
+# Fody - auto-generated XML schema
+FodyWeavers.xsd
\ No newline at end of file
diff --git a/CST116-Ch11-Debugging.sln b/CST116-Ch11-Debugging.sln
new file mode 100644
index 0000000..f71ac42
--- /dev/null
+++ b/CST116-Ch11-Debugging.sln
@@ -0,0 +1,31 @@
+
+Microsoft Visual Studio Solution File, Format Version 12.00
+# Visual Studio Version 17
+VisualStudioVersion = 17.3.32929.385
+MinimumVisualStudioVersion = 10.0.40219.1
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "CST116-Ch11-Debugging", "CST116-Ch11-Debugging\CST116-Ch11-Debugging.vcxproj", "{2F33289E-7D00-4EC4-9951-F3DB9CD7C178}"
+EndProject
+Global
+	GlobalSection(SolutionConfigurationPlatforms) = preSolution
+		Debug|x64 = Debug|x64
+		Debug|x86 = Debug|x86
+		Release|x64 = Release|x64
+		Release|x86 = Release|x86
+	EndGlobalSection
+	GlobalSection(ProjectConfigurationPlatforms) = postSolution
+		{2F33289E-7D00-4EC4-9951-F3DB9CD7C178}.Debug|x64.ActiveCfg = Debug|x64
+		{2F33289E-7D00-4EC4-9951-F3DB9CD7C178}.Debug|x64.Build.0 = Debug|x64
+		{2F33289E-7D00-4EC4-9951-F3DB9CD7C178}.Debug|x86.ActiveCfg = Debug|Win32
+		{2F33289E-7D00-4EC4-9951-F3DB9CD7C178}.Debug|x86.Build.0 = Debug|Win32
+		{2F33289E-7D00-4EC4-9951-F3DB9CD7C178}.Release|x64.ActiveCfg = Release|x64
+		{2F33289E-7D00-4EC4-9951-F3DB9CD7C178}.Release|x64.Build.0 = Release|x64
+		{2F33289E-7D00-4EC4-9951-F3DB9CD7C178}.Release|x86.ActiveCfg = Release|Win32
+		{2F33289E-7D00-4EC4-9951-F3DB9CD7C178}.Release|x86.Build.0 = Release|Win32
+	EndGlobalSection
+	GlobalSection(SolutionProperties) = preSolution
+		HideSolutionNode = FALSE
+	EndGlobalSection
+	GlobalSection(ExtensibilityGlobals) = postSolution
+		SolutionGuid = {FCD03735-5147-4097-A902-410E5803675C}
+	EndGlobalSection
+EndGlobal
diff --git a/CST116-Ch11-Debugging/CST116-Ch11-Debugging.cpp b/CST116-Ch11-Debugging/CST116-Ch11-Debugging.cpp
new file mode 100644
index 0000000..53830da
--- /dev/null
+++ b/CST116-Ch11-Debugging/CST116-Ch11-Debugging.cpp
@@ -0,0 +1,148 @@
+/********************************************************************
+* File: Chapter 11 Debug.cpp
+*
+* General Instructions: Complete each step before proceeding to the
+* next.
+*
+* Debugging Exercise 1
+*
+* 1) Make your own data file like Troy 12, with the next person on the
+*    next line and save it to a directory you create on your drive.
+* 2) Under the Project menu, select Add Existing Item and
+*    add the input file you just placed on your drive to your
+*    current project. Make sure your Solution Explorer window
+*    is visible. If not, you can display it by selecting Solution
+*    Explorer (or Ctrl+Alt+L).
+* 3) Open the input file by simply double clicking the name of the
+*    file in your Solution Explorer.
+* 4) Build and execute the program.
+* 5) Update the file paths below to correctly represent the path you
+*    created.
+* 6) Rebuild and execute the program.
+* 7) Examine the code and the output and notice the use of
+*    parallel arrays.
+* 8) Add the output file created via the execution of
+*    your program to your Project.  Execute your program again
+*    and notice how Visual Studio has rewritten your output file
+*    and asks if you would like to reload the file (select Yes).
+* 9) Examine the contents of both the input and the output file.
+* 10) Fix all the problems in your code that exist in relation to
+*     the output. Verify that your output is appropriate for your
+      input file.
+* 11) Build and execute your code until you have all errors
+*     removed and all the output is correct.
+*
+* Debugging Exercise 2
+*
+* 1) Replace the double slashes (\\) in the input file open statement
+*    with only a single slash
+*    (i.e., inFile.open("C:\TEMP\Chap_11_data.txt").
+* 2) Build your code, noticing the impact of the invalid path you
+*    created in the previous step.
+* 3) Replace the backslashes as they were.
+* 4) Change both the input and output filenames so they are
+*    invalid.
+* 5) Update the file related error messages within the code
+*    to also provide the specific name of the file that is having a
+*    problem.
+* 6) Rebuild and execute your program to verify that your messages
+*    are correct.
+* 7) Correct the path names.
+* 8) Build and execute your code and carefully check your
+*    output on both the console and in the output file.
+*
+********************************************************************/
+#include <iostream>
+#include <fstream>	// For the files!!!!
+#include <iomanip>	// For manipulators & formatting options
+using std::cin;
+using std::cout;
+using std::endl;
+using std::setw;
+using std::ios;
+
+using std::ifstream;
+using std::ofstream;
+
+const int EMPLOYEES = 20;
+const int MAX = 21;
+
+int ReadData(ifstream& inFile, ofstream& outFile, char name[][MAX], int age[]);
+void WriteOutputFile(ofstream& outFile, char name[][MAX], int age[],
+    int counter);
+void PrintTotalsAndSummary(ofstream& out, int totalRecords);
+
+int main()
+{
+    char name[EMPLOYEES][MAX];
+    int age[EMPLOYEES];
+    int record_counter(0);
+
+    ifstream inFile;
+
+    // Notice how this automatically opens the file
+    ofstream outFile("C:\\TEMP\\Chap_11_Report.txt");
+
+    inFile.open("C:\\TEMP\\Chap_11_data.txt");
+
+    if (inFile.is_open())
+    {
+        record_counter = ReadData(inFile, outFile, name, age);
+        inFile.close();
+
+        if (outFile.is_open())
+        {
+            WriteOutputFile(outFile, name, age, record_counter);
+            PrintTotalsAndSummary(outFile, record_counter);
+            outFile.close();
+        }
+        else
+        {
+            cout << "Trouble Opening File";
+            cout << "\n\n\t\t ** About to EXIT NOW! ** ";
+        }
+    }
+    else
+    {
+        cout << "Trouble Opening File";
+        cout << "\n\n\t\t ** About to EXIT NOW! ** ";
+    }
+    return 0;
+}
+int ReadData(ifstream& inFile, ofstream& outFile, char name[][MAX], int age[])
+{
+    int counter = 0;
+    inFile >> name[counter] >> age[counter]; // Priming Read
+
+    while (!inFile.eof())
+    {
+        cout << setiosflags(ios::left) << setw(25)
+            << name[counter] << resetiosflags(ios::left)
+            << setw(4) << age[counter] << endl;
+        counter++;
+        inFile >> name[counter] >> age[counter];
+    }
+
+    return counter;
+}
+void WriteOutputFile(ofstream& outFile, char name[][MAX], int age[], int counter)
+{
+    outFile << "   Here is the Output File" << endl;
+    for (int r = 0; r <= counter; r++)
+    {
+        outFile << setiosflags(ios::left) << setw(25)
+            << name[r] << setw(4)
+            << resetiosflags(ios::left) << age[r]
+            << endl;
+    }
+}
+void PrintTotalsAndSummary(ofstream& outFile, int totalRecords)
+{
+    // To screen
+    cout << "\n\n\t** Total Records: " << totalRecords << " **\n"
+        << "\t\t The End \n";
+
+    // To file
+    outFile << "\n\n\t** Total Records: " << totalRecords << " **\n"
+        << "\t\t The End \n";
+}
diff --git a/CST116-Ch11-Debugging/CST116-Ch11-Debugging.vcxproj b/CST116-Ch11-Debugging/CST116-Ch11-Debugging.vcxproj
new file mode 100644
index 0000000..2073e5b
--- /dev/null
+++ b/CST116-Ch11-Debugging/CST116-Ch11-Debugging.vcxproj
@@ -0,0 +1,135 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup Label="ProjectConfigurations">
+    <ProjectConfiguration Include="Debug|Win32">
+      <Configuration>Debug</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|Win32">
+      <Configuration>Release</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Debug|x64">
+      <Configuration>Debug</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|x64">
+      <Configuration>Release</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+  </ItemGroup>
+  <PropertyGroup Label="Globals">
+    <VCProjectVersion>16.0</VCProjectVersion>
+    <Keyword>Win32Proj</Keyword>
+    <ProjectGuid>{2f33289e-7d00-4ec4-9951-f3db9cd7c178}</ProjectGuid>
+    <RootNamespace>CST116Ch11Debugging</RootNamespace>
+    <WindowsTargetPlatformVersion>10.0</WindowsTargetPlatformVersion>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <UseDebugLibraries>true</UseDebugLibraries>
+    <PlatformToolset>v143</PlatformToolset>
+    <CharacterSet>Unicode</CharacterSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <UseDebugLibraries>false</UseDebugLibraries>
+    <PlatformToolset>v143</PlatformToolset>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+    <CharacterSet>Unicode</CharacterSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <UseDebugLibraries>true</UseDebugLibraries>
+    <PlatformToolset>v143</PlatformToolset>
+    <CharacterSet>Unicode</CharacterSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <UseDebugLibraries>false</UseDebugLibraries>
+    <PlatformToolset>v143</PlatformToolset>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+    <CharacterSet>Unicode</CharacterSet>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+  <ImportGroup Label="ExtensionSettings">
+  </ImportGroup>
+  <ImportGroup Label="Shared">
+  </ImportGroup>
+  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <PropertyGroup Label="UserMacros" />
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+    <ClCompile>
+      <WarningLevel>Level3</WarningLevel>
+      <SDLCheck>true</SDLCheck>
+      <PreprocessorDefinitions>WIN32;_DEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <ConformanceMode>true</ConformanceMode>
+    </ClCompile>
+    <Link>
+      <SubSystem>Console</SubSystem>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <ClCompile>
+      <WarningLevel>Level3</WarningLevel>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <IntrinsicFunctions>true</IntrinsicFunctions>
+      <SDLCheck>true</SDLCheck>
+      <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <ConformanceMode>true</ConformanceMode>
+    </ClCompile>
+    <Link>
+      <SubSystem>Console</SubSystem>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <OptimizeReferences>true</OptimizeReferences>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+    <ClCompile>
+      <WarningLevel>Level3</WarningLevel>
+      <SDLCheck>true</SDLCheck>
+      <PreprocessorDefinitions>_DEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <ConformanceMode>true</ConformanceMode>
+    </ClCompile>
+    <Link>
+      <SubSystem>Console</SubSystem>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+    <ClCompile>
+      <WarningLevel>Level3</WarningLevel>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <IntrinsicFunctions>true</IntrinsicFunctions>
+      <SDLCheck>true</SDLCheck>
+      <PreprocessorDefinitions>NDEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <ConformanceMode>true</ConformanceMode>
+    </ClCompile>
+    <Link>
+      <SubSystem>Console</SubSystem>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <OptimizeReferences>true</OptimizeReferences>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemGroup>
+    <ClCompile Include="CST116-Ch11-Debugging.cpp" />
+  </ItemGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+  <ImportGroup Label="ExtensionTargets">
+  </ImportGroup>
+</Project>
\ No newline at end of file
diff --git a/CST116-Ch11-Debugging/CST116-Ch11-Debugging.vcxproj.filters b/CST116-Ch11-Debugging/CST116-Ch11-Debugging.vcxproj.filters
new file mode 100644
index 0000000..2029dc7
--- /dev/null
+++ b/CST116-Ch11-Debugging/CST116-Ch11-Debugging.vcxproj.filters
@@ -0,0 +1,22 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup>
+    <Filter Include="Source Files">
+      <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
+      <Extensions>cpp;c;cc;cxx;c++;cppm;ixx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
+    </Filter>
+    <Filter Include="Header Files">
+      <UniqueIdentifier>{93995380-89BD-4b04-88EB-625FBE52EBFB}</UniqueIdentifier>
+      <Extensions>h;hh;hpp;hxx;h++;hm;inl;inc;ipp;xsd</Extensions>
+    </Filter>
+    <Filter Include="Resource Files">
+      <UniqueIdentifier>{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}</UniqueIdentifier>
+      <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms</Extensions>
+    </Filter>
+  </ItemGroup>
+  <ItemGroup>
+    <ClCompile Include="CST116-Ch11-Debugging.cpp">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+  </ItemGroup>
+</Project>
\ No newline at end of file
diff --git a/Chap_11_data.txt b/Chap_11_data.txt
new file mode 100644
index 0000000..e4083f4
--- /dev/null
+++ b/Chap_11_data.txt
@@ -0,0 +1,11 @@
+John 19

+Molly 23

+Tim 48

+Keil 42

+Trinh 21

+Anthony 25

+Kevin 27

+Cheryl 32

+Kim 16

+Dave 25

+Will 34