Version updates and read me to include boost instructions

Nothing major

3 files changed, 35 insertions, 57 deletions

diff --git a/doc/build-osx.md b/doc/build-osx.md
index 852fc15d1..c6967e31f 100644
--- a/doc/build-osx.md
+++ b/doc/build-osx.md
@@ -1,4 +1,4 @@
-Mac OS X litecoind build instructions
+Mac OS X dogecoind build instructions
 ====================================
 
 Authors
@@ -8,6 +8,7 @@ Authors
 * Douglas Huff <[email protected]>
 * Colin Dean <[email protected]>
 * Gavin Andresen <[email protected]>
+* Alan Westbrook
 
 License
 -------
@@ -26,15 +27,17 @@ Eric Young ([email protected]) and UPnP software written by Thomas Bernard.
 Notes
 -----
 
-See `doc/readme-qt.rst` for instructions on building Litecoin-Qt, the
+See `doc/readme-qt.rst` for instructions on building Dogecoin-Qt, the
 graphical user interface.
 
-Tested on OS X 10.5 through 10.8 on Intel processors only. PPC is not
+Tested on OS X 10.6 through 10.9 on Intel processors only. PPC is not
 supported because it is big-endian.
 
 All of the commands should be executed in a Terminal application. The
 built-in one is located in `/Applications/Utilities`.
 
+Much of this may be outdated for Dogecoin.
+
 Preparation
 -----------
 
@@ -72,14 +75,14 @@ Installing the dependencies using MacPorts is very straightforward.
 
     sudo port install boost db48@+no_java openssl miniupnpc
 
-### Building `litecoind`
+### Building `dogecoind`
 
 1. Clone the github tree to get the source code and go into the directory.
 
-        git clone [email protected]:litecoin-project/litecoin.git litecoin
-        cd litecoin
+        git clone [email protected]:dogecoin-project/dogecoin.git dogecoin
+        cd dogecoin
 
-2.  Build litecoind:
+2.  Build dogecoind:
 
         cd src
         make -f makefile.osx
@@ -93,7 +96,7 @@ Instructions: HomeBrew
 
 #### Install dependencies using Homebrew
 
-        brew install boost miniupnpc openssl berkeley-db4
+        brew install boost miniupnpc openssl berkeley-db
 
 Note: After you have installed the dependencies, you should check that the Brew installed version of OpenSSL is the one available for compilation. You can check this by typing
 
@@ -107,79 +110,54 @@ If not, you can ensure that the Brew OpenSSL is correctly linked by running
 
 Rerunning "openssl version" should now return the correct version.
 
-### Building `litecoind`
+For boost in dogecoin, there are some ‘fun’ things you have to do:
 
-1. Clone the github tree to get the source code and go into the directory.
+ * download boost from source
 
-        git clone [email protected]:litecoin-project/litecoin.git litecoin
-        cd litecoin
+    ./bootstrap.sh
+    ./b2 --toolset=clang cxxflags="-stdlib=libstdc++" linkflags="-stdlib=libstdc++"   variant=release link=static threading=multi runtime-link=static --build-dir=build   --build-type=minimal stage --with-program_options --with-system --with-filesystem   --with-chrono --with-thread
 
-2.  Modify source in order to pick up the `openssl` library.
+ * link the statics to /usr/local/lib/
+ * make sure the headers for boost are in /usr/local/include/boost or linked from there.
 
-    Edit `makefile.osx` to account for library location differences. There's a
-    diff in `contrib/homebrew/makefile.osx.patch` that shows what you need to
-    change, or you can just patch by doing
+### Building `dogecoind`
+
+1. Clone the github tree to get the source code and go into the directory.
 
-        patch -p1 < contrib/homebrew/makefile.osx.patch
+        git clone [email protected]:dogecoin/dogecoin.git dogecoin
+        cd dogecoin
 
-3.  Build litecoind:
+2.  Build dogecoind:
 
         cd src
         make -f makefile.osx
 
-4.  It is a good idea to build and run the unit tests, too:
+3.  It is a good idea to build and run the unit tests, too:
 
         make -f makefile.osx test
 
 Creating a release build
 ------------------------
 
-A litecoind binary is not included in the Litecoin-Qt.app bundle. You can ignore
-this section if you are building `litecoind` for your own use.
-
-If you are building `litecond` for others, your build machine should be set up
-as follows for maximum compatibility:
-
-All dependencies should be compiled with these flags:
-
-    -mmacosx-version-min=10.5 -arch i386 -isysroot /Developer/SDKs/MacOSX10.5.sdk
-
-For MacPorts, that means editing your macports.conf and setting
-`macosx_deployment_target` and `build_arch`:
-
-    macosx_deployment_target=10.5
-    build_arch=i386
-
-... and then uninstalling and re-installing, or simply rebuilding, all ports.
-
-As of December 2012, the `boost` port does not obey `macosx_deployment_target`.
-Download `http://gavinandresen-bitcoin.s3.amazonaws.com/boost_macports_fix.zip`
-for a fix. Some ports also seem to obey either `build_arch` or
-`macosx_deployment_target`, but not both at the same time. For example, building
-on an OS X 10.6 64-bit machine fails. Official release builds of Litecoin-Qt are
-compiled on an OS X 10.6 32-bit machine to workaround that problem.
-
-Once dependencies are compiled, creating `Litecoin-Qt.app` is easy:
-
-    make -f Makefile.osx RELEASE=1
+    make -f makefile.osx RELEASE=1
 
 Running
 -------
 
-It's now available at `./litecoind`, provided that you are still in the `src`
+It's now available at `./dogecoind`, provided that you are still in the `src`
 directory. We have to first create the RPC configuration file, though.
 
-Run `./litecoind` to get the filename where it should be put, or just try these
+Run `./dogecoind` to get the filename where it should be put, or just try these
 commands:
 
-    echo -e "rpcuser=litecoinrpc\nrpcpassword=$(xxd -l 16 -p /dev/urandom)" > "/Users/${USER}/Library/Application Support/Litecoin/litecoin.conf"
-    chmod 600 "/Users/${USER}/Library/Application Support/Litecoin/litecoin.conf"
+    echo -e "rpcuser=dogecoinrpc\nrpcpassword=$(xxd -l 16 -p /dev/urandom)" > "/Users/${USER}/Library/Application Support/dogecoin/dogecoin.conf"
+    chmod 600 "/Users/${USER}/Library/Application Support/dogecoin/dogecoin.conf"
 
 When next you run it, it will start downloading the blockchain, but it won't
 output anything while it's doing this. This process may take several hours.
 
 Other commands:
 
-    ./litecoind --help  # for a list of command-line options.
-    ./litecoind -daemon # to start the litecoin daemon.
-    ./litecoind help    # When the daemon is running, to get a list of RPC commands
+    ./dogecoind --help  # for a list of command-line options.
+    ./dogecoind -daemon # to start the dogecoin daemon.
+    ./dogecoind help    # When the daemon is running, to get a list of RPC commands
diff --git a/dogecoin-qt.pro b/dogecoin-qt.pro
index 9dc6e87be..8ddd67d7a 100644
--- a/dogecoin-qt.pro
+++ b/dogecoin-qt.pro
@@ -1,7 +1,7 @@
 TEMPLATE = app
 TARGET = dogecoin-qt
 macx:TARGET = "Dogecoin-Qt"
-VERSION = 1.5.0
+VERSION = 1.5.1.1-Develop
 INCLUDEPATH += src src/json src/qt
 QT += core gui network
 greaterThan(QT_MAJOR_VERSION, 4): QT += widgets
diff --git a/src/mac/Info.plist b/src/mac/Info.plist
index 0296d108f..772b244f1 100644
--- a/src/mac/Info.plist
+++ b/src/mac/Info.plist
@@ -14,9 +14,9 @@
 		</dict>
 	</array>
 	<key>CFBundleShortVersionString</key>
-	<string>1.5.0</string>
+        <string>1.5.1.1</string>
 	<key>CFBundleVersion</key>
-	<string>1.5</string>
+        <string>1.5.1.1-Develop</string>
 	<key>NSPrincipalClass</key>
 	<string>NSApplication</string>
 	<key>CFBundleIconFile</key>