From 855fd045e8a1fd76ef7e65ae5806b4e213a592b0 Mon Sep 17 00:00:00 2001
From: Morgan Cyrus <morgan.cyrus@oit.edu>
Date: Wed, 12 Oct 2022 21:17:21 -0700
Subject: Exercise 2 completed.

---
 .../CST116-Ch8-Debugging.cpp                       | 112 +++++++++++++++++++++
 1 file changed, 112 insertions(+)
 create mode 100644 CST116-Ch8-Debugging/enc_temp_folder/a959886991d01a5f6182fffaeacb74/CST116-Ch8-Debugging.cpp

(limited to 'CST116-Ch8-Debugging/enc_temp_folder/a959886991d01a5f6182fffaeacb74/CST116-Ch8-Debugging.cpp')

diff --git a/CST116-Ch8-Debugging/enc_temp_folder/a959886991d01a5f6182fffaeacb74/CST116-Ch8-Debugging.cpp b/CST116-Ch8-Debugging/enc_temp_folder/a959886991d01a5f6182fffaeacb74/CST116-Ch8-Debugging.cpp
new file mode 100644
index 0000000..bcef1c9
--- /dev/null
+++ b/CST116-Ch8-Debugging/enc_temp_folder/a959886991d01a5f6182fffaeacb74/CST116-Ch8-Debugging.cpp
@@ -0,0 +1,112 @@
+/********************************************************************
+* File: CST116-Ch8-Debugging.cpp
+* 
+* Morgan Cyrus
+* CST116
+* CH8 Debugging
+*
+* General Instructions: Complete each step before proceeding to the
+* next.
+*
+* Debugging Exercise 1
+*
+* 1) Insert a breakpoint on the lines indicated in the code.
+* done
+* 
+* 2) Run to Breakpoint 1.
+* done
+* 
+* 3) Place a watch on i.
+* done
+* 
+* 4) Execute the while statement by doing a "Step Into".
+* done
+* 
+* 5) The execution continues to the cout statement as expected.
+* 6) Step over the cout statement.
+* done
+* 
+* 7) Why didn't the flow of the program return back to the while
+*    statement?
+* there is a ; behind the while statement. Additionally the while says while I is less than 0. Since i == 0, the while loop ends (i is 0, not less than 0)
+* 
+* 8) Fix this problem by removing the ; after the while statement.
+* done
+* 
+* 9) Stop debugging and repeat Steps 2 – 5 to verify the correction
+*    worked.
+* done
+* set the while loop to:
+* while (i <= 0)
+    {
+        cout << i << endl;
+    }
+    
+* This resolves the issue and the while loop executes.
+* 
+* 10) Stop debugging.
+*
+*/
+
+/* 
+* Debugging Exercise 2
+*
+* 1) Run to Breakpoint 1.
+* 2) Step into the while loop.
+* 3) Why did the cout not execute?
+* 4) Check the value of i, now check the condition, does the
+*    condition evaluate to true?
+* 5) Change the "< 0" to a "< 10".
+* 6) Stop debugging and repeat Steps 1 – 4 to verify the correction
+*    worked.
+* done
+* 
+* 7) Stop debugging.
+*/
+
+/*
+* Debugging Exercise 3
+*
+* 1) Run the program without debugging.
+* 2) What is happening now is an infinite loop.
+* 3) End your program by holding down the Ctrl key and pressing C.
+* 4) Fix the problem by adding a "++" after the i in the cout
+*    statement.
+* 5) Run the program to Breakpoint 2 and verify that the output
+*    displayed on the screen is 0 – 9.
+*/
+
+/* 
+* Debugging Exercise 4
+*
+* 1) Run to Breakpoint 2.
+* 2) Add a watch to the variable count.
+* 3) Verify that the contents of count is garbage.
+* 4) Step into the loop.
+* 5) What is the value stored in count now?
+* 6) Where was 10 assigned to count?
+* 7) Fix the problem and re-run to verify.
+********************************************************************/
+#include <iostream>
+using std::cout;
+using std::endl;
+
+int main()
+{
+    int i = 0;
+    int count;
+
+    // Breakpoint 1
+    // Put a breakpoint on the following line
+    while (i < 10)
+    {
+        cout << i << endl;
+    }
+
+    // Breakpoint 2
+    // Put a breakpoint on the following line
+    for (count = 0; count < 10; count++);
+    cout << count << endl;
+
+    return 0;
+}
-- 
cgit v1.2.3